Sample gas probe with weather protection and in-situ filter with blowback system. With temperature self-regulating heater. The blowback control can be automated. For applications with high dust load.
Buehler GAS 222.31 AMEX Sample gas probe
- Heated up to 120 °C/70 °C • 248 °F/158 °F
- 115/230 V
- C-US and CSA approved Cl. I, Div. 2 Gps. BCD
- Base unit with manual shut-off valve
- With weather hood
- With self-regulating heater
- With blowback connection
- Insulation
- Flange seal included
Description
Additional information
| Brand |
|---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Related products
Buehler GAS 222.20 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Heated probe with outlet filter and weather hood
- The outlet filter can easily be removed by turning the handle 90°
- The probe body and the area around the screw connection for the heated sample gas line are completely isolated
- Heater self-regulating to approx. 130 °C/ 266 °F (T3)/70 °C/158 °F (T4) with low temperature alarm
- For dust loads up to 2 g/m³
- This probe is suitable for use in explosive areas
Buehler GAS 222.11 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Unheated probe with shut-off valve and/or inlet filter
- The filter element can easily be removed by turning the handle 90°
- For dust loads up to 2 g/m³, non-condensable gases.
- Combined with inlet filter up to 10 g/m³ and higher
- The probe is suitable for use in explosive areas
Buehler GAS 222.15 MA Sample gas probe
- Heated probe with downstream filter
- The downstream filter can easily be removed by turning the handle 90°.
- Increased degree of protection (IP66) due to the specially developed silicone protective cover
- Particularly suitable for use in high-vibration applications (such as marine) due to special design features
- The probe body and the area around the screw connection for the heated sample gas line are completely insulated
- Self-regulating heater to approx. 180 °C with low temperature alarm.
- For dust loads up to 2 g/m³