Steam-heated sample gas probe with weather protection and integrated particle filter. For processes with low dust load. The filter can be replaced without tools.
Buehler 4622220EX1 Sample gas probe
Insulating ring, cap end, for 2-pc. insulation GAS 222.20 Ex, made from high temperature compound
Description
Additional information
| Brand |
|---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Related products
Buehler GAS 222.15 MA Sample gas probe
- Heated probe with downstream filter
- The downstream filter can easily be removed by turning the handle 90°.
- Increased degree of protection (IP66) due to the specially developed silicone protective cover
- Particularly suitable for use in high-vibration applications (such as marine) due to special design features
- The probe body and the area around the screw connection for the heated sample gas line are completely insulated
- Self-regulating heater to approx. 180 °C with low temperature alarm.
- For dust loads up to 2 g/m³
Buehler GAS 222.11 Sample gas probe
- Unheated
- Base unit with manual shut-off valve
- For in-situ and outlet filter
- With blowback connection
- The outlet filter can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases. Combined with inlet filter up to 10g/m³ and higher
- Including flange seal and screws
The probe has no innate ignition source and is therefore suitable for use in Ex areas.
Buehler GAS 222.11 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Unheated probe with shut-off valve and/or inlet filter
- The filter element can easily be removed by turning the handle 90°
- For dust loads up to 2 g/m³, non-condensable gases.
- Combined with inlet filter up to 10 g/m³ and higher
- The probe is suitable for use in explosive areas
