Brand |
---|
Keyence BL-185 CCD Barcode ReaderBL-180 series
Ultra Small CCD Barcode Reader, Side Type
SKU:
BL-185
Categories: Auto ID Products, Relays, Sensors, Vision / Auto ID
Additional information
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Model | BL-185 | |
Reading direction | Side | |
Light source/Light receiving element | LED/CCD image sensor | |
Reading distance | 33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width) | |
Readable bar width | 0.125 to 1.0 mm *2 | |
Largest readable label width | 80 mm *3 (Using narrow bars of at least 0.19 mm in width) | |
PCS | 0.45 or more (Refl ectance of white part: 75% or more) | |
Scanning rate | 500 scans/sec | |
Supported codes | CODE39, ITF, Industrial 2-of-5, COOP 2-of-5, Codabar, CODE128, EAN/UPC (A·E) | |
Number of readable digits | 32 digits | |
Trigger input | Non-voltage input (contact or solid-state), TTL input is also possible. | |
Serial interface | Applied standard | RS-232C |
Synchronisation | Start-Stop | |
Transmission code | ASCII | |
Baud rate | 600/1200/2400/4800/9600/19200/31250/38400 bps | |
Data length | 7/8 bits | |
Parity check | None/Even/Odd | |
Stop bit length | 1 bit/2 bits | |
OK/NG output | Output form | NPN |
Rated load | 24 VDC, 100 mA | |
Leakage current (at OFF) | 0.1 mA max. | |
Residual voltage (at ON) | 0.5 V max. | |
Rating | Power voltage | 5 VDC ±5 %*4 |
Current consumption | 300 mA | |
Environmental resistance | Ambient light | Sunlight/Incandescent lamp: 10,000 lux, Fluorescent lamp: 3,000 lux. |
Operating environment | No dust or corrosive gas present | |
Ambient temperature | 0 to +40 °C | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Weight | Approx. 180 g | |
*1 33 ±5 mm when the narrowest bar is less than 0.19 mm. *2 Readable bar width indicates the range of the narrowest readable bar. *3 60 mm when the narrowest bar is less than 0.19 mm. *4 Use a stable power supply of 5 VDC ±5 % . |