The SoftPLC S5-943 / S5-945 executes a program in the same manner as a hardware PLC. The advantage of executing a PLC program this way is, that the PLC status can be displayed in real time. Since the SoftPLC behaves like a original SIMATIC PLC, the programming tools S5 for Windowsо and STEP5 can be used. Online connections can be estasblished serial, via Ethernet and directly in the same PC. The program of a S5-PLC can be transferred to the SoftPLC S5-943 / S5-945.
The SoftPLC can access standard I/O boards as well as numerous intelligent hardware boards available to control bus systems widely used in the industry (PROFIBUS DP, DeviceNet, CAN-Bus). Drivers have been developed to connect bus system interface boards with the SoftPLC.
In a single processor system, the software PLC simultaneously shares the CPU time with other applications to be executed. The CPU time allocation is freely scaleable. For instance fifty percent (50%) of the CPU time (time slice) is assigned to the software PLC and the other 50% is used by the other applications. The software PLC is called within a preset timeframe. In a Windows environment with a dual processor system, one CPU is exclusively reserved for the software PLC. The PLC cycle time depends on the execution time of the OB1. If OB1 has a short execution time, the number of cycles per time period is high.
There are Coprocessor boards available, running the SoftPLC. These Coprocessor boards can be plugged into the motherboard of the PC. The SoftPLC is running completely independent from the PC hardware. The additional processor board may be powered with its own power supply. Such a set up has the advantage of being independent of a PC failure that would impact the SoftPLC. Well-known manufacturers offer processor boards with integrated bus interfaces (InterBus, PROFIBUS, Can Bus, ASi Bus, DeciveNet) as a complete PLC solution.
Monitoring, Operating, and Controlling simultaneously from one PC is possible. The SoftPLC integrated in a PC allows process monitoring, operation and control from one hardware unit. The use of the SoftPLCis especially useful, if a PC for data collection, process visualization, programming, or any other reason needs to be used anyway. Such a solution eliminates the need for a hardware PLC and the corresponding communication processor.
Access with IBH OPC Server / DLL Interface to Windows Applications is also possible. With the IBH OPC Server, a communication via Ethernet to the S5 and S7 SoftPLC as well as a direct communication in the same PC can be established. For fast data transfer between the SoftPLC and other Windows applications, a DLL is available. Examples for the usual programming tools are supplied. Numerous visualization software suppliers have drivers available for fast data transfer between theSoftPLC and their visualization software
Integrated Watchdog Function Intelligent up-to-date Bus Control Boards today have integrated watchdog functions. These watchdog functions guarantee that the inputs and outputs of the SoftPLC, in case of a hardware failure of the PC, are handled in the same way as a hardware PLC CPU. If the PC fails, all the outputs of the Bus System are reset.
Scalability There are two versions of the S5 compatible SoftPLC. The major difference between them is the size of the PLC program memory. The PLC S5-943 has 48kB of program memory and the PLC S5-945 has 720kB of program memory. The execution time of the software PLC, of course will depend on the execution time of the PCs processor. Both versions have an integrated PID algorithm. Internally, the PID algorithm uses floating point operations to increase accuracy. To be compatible with a Siemens CPU, the interface of the PID algorithm matches the Siemens interface.
To connect the PC executing the SoftPLC with the outside world, an interface board is required. Small applications may only require Multi-I/O boards. These boards can be accessed directly from the SoftPLC without major effort. The SoftPLC provides special instructions (DO RS 10 up to DO RS 31) to use standard boards (I/O port access). These commands can read from inputs and write to outputs in the lower 64k segment of the PC. It is also possible to connect the PC to an external Bus System. In addition to standard I/O boards, different bus systems can be accessed via the SoftPLC. Numerous intelligent hardware boards are available to control bus systems widely used in industry (e.g. INTERBUS, PROFIBUS DP, CAN ASi DeviceNet, etc.). To access bus interface boards, drivers have been developed by IBHsoftec. Optionally, drivers for the following bus systems are available: INTERBUS (boards from Phoenix and Hilscher), PROFIBUS DP, CAN, ASi, DeviceNet (boards from Hilscher).
With a standard Ethernet board it is possible to connect to an existing network (Internet, Intranet) with the TCP/IP-Protocol. The TCP/IP-Protocol enables diagnostics of the SoftPLC via the internet or a continuous data exchange is possible via a Company Intranet. This is accomplished with S5 for Windowsо. also has the ModbusTCP- und CP-functionality integrated.
To meet the demands of our customers and provide flexibility, a variety of hardware and software platforms are available that are supported by the software PLC. The S5 version can be installed on the latest Windows operating systems. A S5-Windows CE version for our OEMs is also available.
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.