- Proximity switch spacing 12 mm
- Upright housing, small flange
- Degree of protection IP67 according to IEC 60529
- Plug connector M12, 5-pin
- LED function display
Euchner SN02X12-732L-MC2432 Multiple limit switch, upright SN
SKU:
123939
Categories: Position switcheses and multiple limit switcheses, Sensors
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Rated operating distanceWith 12 mm proximity switch spacing, the rated operating distance is 5 mm.
LED function displayThe switching elements are equipped as standard with a function display (yellow). The function display can be clearly seen from the exterior.
Terminal assignment
PE/FE over thread screen connection
Electrical connection ratings
Work area
Other
Pin | Function | Wire color |
---|---|---|
1 | +24 V VS1 | BN |
2 | Input 2 | WH |
3 | 0 V | BU |
4 | Input 1 | BK |
5 | +24 V VS2 | GY |
Design | Upright |
Material | |
Active face | PBT |
Housing material | Die-cast aluminum |
Weight | |
Approx. | 0,4 kg |
Ambient temperature | -25 ... +70 °C |
Degree of protection | IP67 |
Proximity switch spacing | 12 mm |
Switching principle | NC |
Number of switching elements | 2 |
Number of NC contacts | 2 |
Connection | |
1 x plug connector M12 | |
Connection terminals on the switching element |
Test pulses | |
T (LOW) on sensor pulsing | 0,1 ... 20 ms |
LOW level | |
On sensor pulsing | 0 ... 5 V DC |
Mark/space ratio Ton | |
T (HIGH) : T (LOW) on sensor pulsing | 0.167361111111111 |
Operating current | max.5 mA Current consumption without load |
Operating voltage | |
DC | 24 V 20 ... 33 V Power supply unit with electrical isolation as per EN 61558-2-6 or sensor pulsing UB (HIGH) |
Rated operating current Ie | 250 mA |
Utilization category according to EN 60947-5-2 | |
DC-12 | 250 mA, 33 V |
Short circuit and overload protection, pulsed | Yes |
Residual ripple | |
From UB or UB(HIGH) | max.10 % |
Reverse polarity protection | Yes |
EMC protection requirements | EN 60947-5-2 |
Type of output | PNP |
Off-state current Ir | max.0,001 mA |
Voltage drop Ud | |
DC | max.2,5 V |
Switching frequency, electrical | max.500 Hz |
Safety class | |
EN IEC 61140 | III |
LED indicator | |
At 6.8mA | Yes |
Repeat accuracy R | max.5 % |
Rated operating distance Sn | 5 mm |
Assured operating distance Sa | 0 ... 4 mm |
Switching hysteresis | 0,2 ... 1,0 mm |
Center offset | |
At s = 1 mm | mON = (-) 4.2 mm and mOFF = (-) 4.0 |
At s = 4 mm | mON = (-) 0.5 mm and mOFF = 0.0 |
At s = 3 mm | mON = (-) 2.5 mm and mOFF = (-) 2.0 |
At s = 2 mm | mON = (-) 3.3 mm and mOFF = (-) 3.0 |
C number | |
C2432 | |
Additional information | Housing without earth conductor! |