- Electronic-Key adapter with 4-bit parallel interface
- Simple connection
- Read-only system
- Electronic-Key adapter and evaluation electronics in one housing
- Reliable retention of the Electronic-Key, even if there is heavy vibration
- Internal evaluation of the data from the Electronic-Key
- Output of the access level via 4-bit parallel interface
- Has all operating states
- Connection to PLC
- Version FSA (For Safety Applications)
Euchner EKS-A-IPLA-G01-ST05/04 Electronic-Key adapter for safe applications EKS Light FSA compact
SKU:
112207
Categories: Electronic-Key-System EKS, Safety switcheses and tools
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Dimension drawing
Wiring diagram
Dimension drawingWiring diagram
Technical dataApprovals
Mechanical values and environment
Electrical connection ratings
Interface, bus
Other
Housing material | PA6-GF30 gray |
Ambient temperature | -20 ... 70 °C |
Degree of protection | IP67 in installed state (only access side) |
Mounting method | On the front |
Mounting cut-out according to DIN 43700 | 33 x 68 mm |
LED indicator | |
Green | Operational |
Yellow | Key in operating distance |
Red | Fault |
Connection cross-section | 0,14 ... 1,5 mm? |
Parameters for floating semiconductor switching contact LA | |
Switching voltage | 0 ... 24 ... 30 V |
Switching current | 1 ... 10 ... 50 mA In event of short circuit the output is shut down |
Utilization category according to EN 60947-5-1 | |
AC-15 | 24V 50mA |
AC-12 | 24V 50mA |
DC-12 | 24V 50mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 50mA |
Interface and signaling | |
Switching voltage | UB-2 ... UB V High signal |
Switching current | 1 ... 10 ... 50 mA High signal |
Power supply | |
Operating voltage DC | 9 ... 24 ... 28 V DC |
Current consumption | max.70 mA |
Interface and signaling | |
Data interface | 4-bit parallel plus strobe, binary coded via High/Low level |
Parameters for floating semiconductor switching contact LA | |
Additional feature | |
35 Resistance in switched-on state in Ohm | |
max.1 Capacitive load on output in µF |