- Switch head can be used as end stop
- With snap-action switching element
- Plunger material stainless steel
- Any installation position
Euchner EGT3SEM4 Precision single hole fixing limit switches EGT, EGM and EGZ
SKU:
70834
Categories: Position switcheses and multiple limit switcheses, Sensors
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Switching elementSnap-action switching contact, 1 NC contact and 1 NO contact
Single hole fixing limit switch allowed to be used as an end stop.
Dimension drawing
Wiring diagram
Wiring diagram
Dimension drawingWiring diagramWiring diagram
Technical dataApprovals
Mechanical values and environment
Electrical connection ratings
Design | Switch head can be used as end stop (for bore O18H9) |
Housing material | |
End stop | Hardened steel |
Sleeve | Brass, nickel-plated |
Ambient temperature | -5 ... 60 °C |
Degree of protection | IP67 |
Mechanical life | 1 x 106 |
Contact material | Fine silver gold-plated |
Switching principle | Snap-action switching contact |
Repeat accuracy (absolute) | ±0,01 mm |
Installation orientation | Any |
Number of NC contacts | 1 |
Number of NO contacts | 1 |
Connection | Plug connector M12 |
Approach speed | max.8 m/min |
Actuating element | Ball plunger |
Actuating force | |
Approx. | 18 N |
Utilization category according to EN 60947-5-1 | |
DC-13 | 1A 24V |
AC-12 | 2A 30V |
Short circuit protection according to IEC 60269-1 | 2A gG |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching voltage | |
min. | 12 V |
Switching current | |
Min. at 24V | 10 mA |