- With snap-action switching element
- Plunger material stainless steel
- Any installation position
Euchner EGT2-5000 Precision single hole fixing limit switches EGT, EGM and EGZ
SKU:
1865
Categories: Position switcheses and multiple limit switcheses, Sensors
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Switching elementSnap-action switching contact, 1 NC contact and 1 NO contact
Single hole fixing limit switches must not be used as an end stop.
Dimension drawing
Wiring diagram
Dimension drawingWiring diagram
Technical dataApprovals
Mechanical values and environment
Electrical connection ratings
Design | Thread M18 x 1 |
Housing material | |
Sleeve | Brass, nickel-plated |
Threaded section | Brass, nickel-plated |
Ambient temperature | -5 ... 60 °C |
Degree of protection | IP67 |
Mechanical life | 1 x 106 |
Contact material | Fine silver gold-plated |
Switching principle | Snap-action switching contact |
Repeat accuracy (absolute) | ±0,01 mm |
Installation orientation | Any |
Number of NC contacts | 1 |
Number of NO contacts | 1 |
Connection | PUR cable |
Cable length | 5 m |
Approach speed | 0,01 ... 10 m/min |
Actuating element | Ball plunger |
Actuating force | |
Approx. | 24 N |
Utilization category according to EN 60947-5-1 | |
AC-15 | 2A 230V |
DC-13 | 1A 24V |
Short circuit protection according to IEC 60269-1 | 2A gG |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching voltage | |
min. | 12 V |
Switching current | |
Min. at 24V | 10 mA |
Connection cross-section | 0,75 mm? |