- Diaphragm made of Viton
- For plug connector with LED display
- With snap-action switching element
- Plunger material stainless steel
- Any installation position
Euchner EGT1SEM4C2221 Precision single hole fixing limit switches EGT, EGM and EGZ
SKU:
102479
Categories: Position switcheses and multiple limit switcheses, Sensors
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Switching elementSnap-action switching contact, 1 changeover contact
Single hole fixing limit switches must not be used as an end stop.
Electrical connection ratings
Other
Design | Thread M14 x 1 |
Housing material | |
Sleeve | Brass, nickel-plated |
Threaded section | Brass, nickel-plated |
Ambient temperature | -5 ... 80 °C |
Degree of protection | IP67 |
Mechanical life | 1 x 106 |
Contact material | Silver alloy, gold-plated |
Switching principle | Snap-action switching contact |
Repeat accuracy (absolute) | ±0,01 mm |
Installation orientation | Any |
Number of NC contacts | 1 |
Number of NO contacts | 1 |
Connection | Plug connector M12 |
Approach speed | 0,01 ... 8 m/min |
Actuating element | Ball plunger |
Actuating force | |
Approx. | 20 N |
Utilization category according to EN 60947-5-1 | |
AC-15 | 0.5A 50V |
DC-13 | 0.6A 24V |
Short circuit protection according to IEC 60269-1 | 2A gG |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching voltage | |
min. | 12 V |
Switching current | |
Min. at 24V | 10 mA |
C number | |
C2221 | Diaphragm made of viton, special wiring for elbow connector with LEDs |