- Safety switches with integrated read head and integrated evaluation unit.
- LED diagnostic displays
- switch-on distance 9 mm
Euchner CMS-R-AZA-01PL-AS1 Read heads CMS with reed contacts
SKU:
105090
Categories: Safety Switches, Safety switcheses and tools
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
ActuatorAn appropriate actuator to suit the read head selected is required. The dimensions of the actuators are the same as those of the read heads, although the former have no connection cable.
AS-Interface inputs
Evaluation is performed via a safety monitor.
AS-Interface output
LED function display
Electrical connection ratings
Work area
Other
Reliability values according to EN ISO 13849-1
D0 - D3 | Switch actuated/open |
D1 | LED 1 on read head (only CMS-R-AZA...) |
- The ASI LED (dual LED red/green) displays the colors red, green and yellow. The status of the switch and the bus is indicated via this LED.
- LED 1 can be connected via the AS-Interface bus, e.g. to indicate the door state.
Design | A |
Material | |
Cable material | PUR |
Housing material | Reinforced thermoplastic (PPS), fully encapsulated |
Weight | |
Net | 0,1 kg |
Ambient temperature | -25 ... 60 °C |
Degree of protection | IP67 |
Mechanical life | 100 x 106 |
Installation orientation | Any, pay attention to marking |
Reaction time | |
After change in the actuation status | max.5 ms |
Connection | Hard-wired encapsulated cable with plug connector M12 |
Cable length | 1 m |
Method of operation | Magnetic, reed contact |
ASi voltage | 30 V 26,5 ... 31,6 V |
ASi operating current | max.30 mA |
ASi slave type | |
According to ASI specification 3.0 | EA code: 7 |
ID code: B | |
ASi data in | |
According to ASI safety at work | D0,D1,D2,D3 |
ASi data out | |
LED red | D1 |
ASi LED | |
LED red flashing | Fault |
LED green | Normal operation |
LED red | No data exchange between master and slave |
LED red/yellow alternately flashing | No data exchange between master and slave |
LED red/green alternately flashing | Fault |
Switch-on distance | 9 mm |
Assured switch-off distance Sar | max.70 mm |
Center offset | 2,5 mm |
In compliance with | EN 60947-5-3: 2013; EN ISO 13849-1: 2008; EN ISO 14119: 2013; EN 62026-2: 2013 (AS-i) |
Monitoring of the safety guard position | |
Category | 3 |
Performance Level | PL e |
B10D | 3 x 106 |
PFHD | 4.29 x 10-8 |
Mission time | 20 y |