Sample gas probe for Zone 1, 2, 21, and 22 explosive areas, with weather protection and in-situ filter with blowback system. With temperature self-regulating heater and integrated safety filter. For applications with high dust load. The safety filter can be replaced without tools.
Buehler GAS 222.21 Ex1 Sample gas probe
- Heated to 90 °C / 194 °F at Ta=25 °C / 77 °F
- 115/230 V
- 1GD / 2GD T4 T130 °C / 266 °F
- Base unit with manual shut-off valve
- For in-situ and outlet filters
- With weather hood
- With self-regulating heater
- With blowback connection
- Explosion protected terminal box
- Insulation
- Including flange seal and screws
Category: Sample Gas Probes
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Related products
Buehler GAS 222.10 Sample gas probe
- Unheated probe with outlet filter for indoor installation.
- The filter element can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases.
- The probe has no innate ignition source and is therefore suitable for use in Ex areas.
- Base unit
- Including flange seal and screws
Buehler GAS 222.20 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Heated probe with outlet filter and weather hood
- The outlet filter can easily be removed by turning the handle 90°
- The probe body and the area around the screw connection for the heated sample gas line are completely isolated
- Heater self-regulating to approx. 130 °C/ 266 °F (T3)/70 °C/158 °F (T4) with low temperature alarm
- For dust loads up to 2 g/m³
- This probe is suitable for use in explosive areas
Buehler BA 5000 Gas Analyser for IR-Sensitive Gases and Oxygen
- Sturdy 19” sheet steel housing
Option: Desktop version with handles - NAMUR-based operation
- Quick and easy parametrisation and setup
- AUTOCAL with ambient air for virtually maintenance-free operation
- Adjustment with test gas only required every six to twelve months depending on application
- Large backlit LCD screen
- Two measuring ranges per component
- Automatically corrects fluctuations in barometric pressure
- Monitors the sample gas flow rate
- Two programmable limits
- Three binary inputs
- Eight relay outputs
- Up to four analogue outputs 4-20 mA, electrically isolated
- RS 485
Buehler GAS 222.11 Sample gas probe
- Unheated
- Base unit with manual shut-off valve
- For in-situ and outlet filter
- With blowback connection
- The outlet filter can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases. Combined with inlet filter up to 10g/m³ and higher
- Including flange seal and screws
The probe has no innate ignition source and is therefore suitable for use in Ex areas.