Heated probe with integrated particle filter for gas sampling from processes with low dust load. The filter can be replaced without tools. The heater is self-regulating.
Buehler GAS 222.15 ANSI/CSA Sample gas probe
- Heated 180 °C / 356 °F
- 115/230 V
- Base unit
- With self-regulating heater
- Low temperature alarm 140 °C / 284 °F
- Insulation
- Flange seal included
Category: Sample Gas Probes
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Related products
Buehler GAS 222.10 Sample gas probe
- Unheated probe with outlet filter for indoor installation.
- The filter element can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases.
- The probe has no innate ignition source and is therefore suitable for use in Ex areas.
- Base unit
- Including flange seal and screws
Buehler GAS 222.20 HT Sample gas probe
- Heated probe with downstream filter and weather hood
- The downstream filter can easily be removed by turning the handle 90°
- The probe body and the area around the screw connection for the heated sample gas line are completely isolated
- Electronic temperature controller up to 280 °C with Pt100, high/low temperature alarm and display
- TFor dust loads up to 2 g/m³
- This probe is not suitable for use in Ex areas
Buehler GAS 222.11 Sample gas probe
- Unheated
- Base unit with manual shut-off valve
- For in-situ and outlet filter
- With blowback connection
- The outlet filter can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases. Combined with inlet filter up to 10g/m³ and higher
- Including flange seal and screws
The probe has no innate ignition source and is therefore suitable for use in Ex areas.
Buehler GAS 222.11 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Unheated probe with shut-off valve and/or inlet filter
- The filter element can easily be removed by turning the handle 90°
- For dust loads up to 2 g/m³, non-condensable gases.
- Combined with inlet filter up to 10 g/m³ and higher
- The probe is suitable for use in explosive areas