Heated probe with integrated particle filter for gas sampling from processes with low dust load. The filter can be replaced without tools. The heater is self-regulating.
Buehler 9136050056 Sample gas probe
Thermostat 155°C NO contact min. IP40 trigger point 155°C +/-5K reset point 140°C +/-5K max. ambient temperature 200°C
Description
Additional information
| Brand |
|---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Related products
Buehler BA 2000 Oxygen Flue Gas Analyser
- Fast response time
- Tool-less filter change
- Easy handling
- Flue gas temperatures up to 1600 °C / 2912 °F
- Durable ZrO2measuring cell
- Display with O2measurements
- 4-20 mA output signal
- Ambient temperature -20 to +70 °C respectively 4 to 158 °F
- No reference glass required
- No test gas required
- No gas conditioning required
- Calibration with instrument air
Buehler GAS 222.11 Sample gas probe
- Unheated
- Base unit with manual shut-off valve
- For in-situ and outlet filter
- With blowback connection
- The outlet filter can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases. Combined with inlet filter up to 10g/m³ and higher
- Including flange seal and screws
The probe has no innate ignition source and is therefore suitable for use in Ex areas.
Buehler GAS 222.20 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Heated probe with outlet filter and weather hood
- The outlet filter can easily be removed by turning the handle 90°
- The probe body and the area around the screw connection for the heated sample gas line are completely isolated
- Heater self-regulating to approx. 130 °C/ 266 °F (T3)/70 °C/158 °F (T4) with low temperature alarm
- For dust loads up to 2 g/m³
- This probe is suitable for use in explosive areas
Buehler BA3 Multi Component Gas Analyser
- Up to three separate gas paths O2measurement paramagnetic, electrochemical and/or ZrO2
- Modular, easy to maintain design
- User-friendly touch screen
- All relevant limit- and status alarms
- Optional: Graphic on-screen flow display
- Optional: Up to three float flow meters
- Optional: Up to three built-in pumps
- Optional: Pressure- and temperature compensation