BEI Sensors/Sensata H25 Series Incremental Encoder 01124-003
Click to enlarge
BEI Sensors/Sensata

BEI Sensors/Sensata H25 Series Incremental Encoder 01002-9355

SKU: 01002-9355 Categories: , ,
Description

The H25 is the flagship of the BEI Sensors product line. It was designed from the ground up for the industrial marketplace. The H25 offers features such as EMI shielding, high precision ball bearings and matched thermal coefficients on critical components. The encoder meets up to IP66 sealing requirements when ordered with the shaft seal.

Applications:
Machine control;  from wood harvesting all the way to processed lumber; oil well logging; agricultural equipment; web process control; food processing.

Model: H25G-SB-1250-ABC-28/V-SM18

Disclaimer: Photos and drawings shown are for illustration purposes only, actual product may vary.

Features

  • Wide operating temperature range 
  • Ruggedized, well-sealed unit for long life operation
  • Industry standard interfaces make it easy to install
  • Extensive electrical protection reduces damage due to miswiring
  • High noise immunity especially useful in electrically noisy automation environments
  • Selected configurations available in 1 to 3 days shipment (“Express Encoder” option)
Additional information
Brand

GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Shaft Diameter 3/8” standard (1/4” as special feature)
Flat on Shaft 3/8” Shaft: 0.75 long X 0.03” deep, 1/4” shaft 0.75 X .02 deep
Shaft Loading 3/8” shaft: Up to 40 pounds axial and 35 pounds radial
Shaft Runout 0.0005 T.I.R. at midpoint regardless of shaft diameter).
Starting Torque at 25°C 1.0 in-oz max without shaft seal; 2.5 in-oz max with shaft seal.
Bearings High precision ball bearings, Material: Chrome steel; shielded bearings standard, sealed bearings optional
Shaft Material Stainless Steel
Bearing Housing Die cast aluminum with protective finish
Cover Die cast aluminum with protective finish
Bearing Life 2 X 108 revs (1300 hrs at 2500 RPM) at rated load, 1 X 1010 revs (67,000 hrs at 2500 RPM) at 10% of rated load
Maximum RPM 10,000 RPM nominal, 8000 RPM with 1/2” shaft (see Frequency Response, below)
Moment of Intertia 4.1 X 10-4 oz-in-sec2
Weight 13 oz typical

Related products

Eltra EMBO Encoder

Eltra EMB Encoder

, ,
This EMB / EMBO board is used when it’s necessary to adapt the encoder electronic features to control devices connected among them.
Eltra EP A Encoder

Eltra EP A Encoder

, ,
EP rotary encoders series with potentiometric output signal. The potentiometer is fitted in a sturdy housing and it’s supported by
Eltra EA 115 A - Parallel / SSI - Solid shaft Rotary absolute encoder

Eltra EA 63 F – Parallel / SSI – Blind hollow shaft Rotary absolute encoder

, ,
Blind hollow shaft EA 58 – EA 63 (ø 58-63 mm) series of optical singleturn absolute encoders, with parallel or SSI electronics. This series has cable connector
Eltra RM 500 C Encoder

Eltra RL 500 A Encoder

, ,
The RL 500 / RM 500 metric wheels are designed for specific industrial applications where is required to measure a linear movement
Eltra EMD Encoder

Eltra EMD Encoder

, ,
The EMD board is used whenever it’s necessary to carry out a selected signal among a maximum of three inputs.
Eltra EV B Encoder

Eltra EV B Encoder

, ,
Not recommended for new design. The electronic hand-wheel EV series is designed for positioning on CNC machines with manual drive. High resolution (2.500
Eltra RM 500 C Encoder

Eltra RL 500 B Encoder

, ,
The RL 500 / RM 500 metric wheels are designed for specific industrial applications where is required to measure a linear movement
Eltra EA 63 G Profibus - Blind hollow shaft Rotary absolute encoder

Eltra EA 63 F Profibus – Blind hollow shaft Rotary absolute encoder

, ,
The blind hollow shaft singleturn EA 58 – EA 63 encoder series complies with the PROFIBUS® DP standard (as described on the European Standard EN 50170 Vol.