Brand |
---|
Baumer VCXG-124C.I.XT CX series
- 4096 x 3000 px
- Sony IMX304
- 1.1″ CMOS
- 9 fps
- Gigabit Ethernet
- available
SKU:
11188929
Category: Industrial cameras / image processing
Additional information
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Technical data
sensor information
- sensor
- Sony IMX304
- resolution
- 4096 × 3000 px
- exposure time
- 0,001 … 60000 ms
- pixel size
- 3.45 × 3.45 µm
- shutter type
- Global shutter
- sensor type
- 1.1″ CMOS
- image formats, interface frame rate max.
- Full Frame, 4096 × 3000 px, max. 9 fps
- Binning 2×2, 2048 × 1500 px, max. 15 fps
- Binning 2×1, 2048 × 3000 px, max. 15 fps
- Binning 1×2, 4096 × 1500 px, max. 15 fps
- image formats, aquisition frame rate max. (Burst Mode)
- Full Frame, 4096 × 3000 px, max. 15 fps
- pixel formats
- BayerRG8
- BayerRG10
- BayerRG12
- BayerRG12 Packed
- Mono8
- Mono10
- Mono12
- Mono12 Packed
- RGB8
- BGR8
- analog controls
- Gain (0 … 48 dB)
- Offset (0 … 255 LSB 12 Bit)
- color models
- Mono
- RGB
- BGR
- synchronization
- free running
- trigger
- trigger sources
- Hardware
- software
- ActionCommand
- trigger delay
- 0 … 2 sec, tracking and buffering of up to 256 trigger signals
- internal image buffer
- 36 MB
- 1 image (Trigger Mode)
- 1 image (Free Running Mode)
- data interface
- Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type
- process interface
- M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
- power supply
- via M12/12 pins a-coded or PoE
- lens mount
- C-mount
- width
- 40 mm
- height
- 40 mm
- depth
- 51 mm
- weight
- ≤ 137 g
- material
- aluminum, hard-anodized
- voltage supply range +Vs
- 12 … 24 V DC (external power supply)
- 36 … 57 V DC (Power over Ethernet)
- power consumption
- approx. 2,6 W @ 12 VDC and 9 fps
- approx. 3,2 W @ 48 VDC (PoE) and 9 fps
- flash memory size
- 128 kB
- operating temperature
- -40 ... +70 °C @ T = measurement point
- humidity
- 10 … 90 % (non-condensing)
- protection class
- IP 40
- IP 54 (with mounted tube and cable)
- IP 65 (with mounted tube and cable)
- IP 67 (with mounted tube and cable)
- IP 69K (with stainless steel housing accessory)
- lines
- 4 input lines
- 4 output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
- conformity
- CE
- RoHS
- EAC
Related products
Baumer B1 Illumination / Illumination accessory
- Split cable M12/12-pin female connector to 1x M8/3-pin male connector (to power the camera and I/Os, enable hardware trigger via input) and 1x M8/3-pin female connector for one illumination
- The I/O voltage is directly distributed to the illuminations.
- Protection class IP65/IP67
- Length 100 cm (M12/12-pin cable 80 cm, M8 cables 20 cm)