Sample gas probe with weather protection with blowback compatible in-situ filter. With temperature adjustable heater. The blowback control can be automated. For applications with high dust load.
Buehler GAS 222.31 ANSI/CSA Sample gas probe
- Heated, temperature adjustable up to 200 °C / 392 °F
- 115/230 V
- Base unit with manual shut-off valve
- With blowback connection
- With weather hood
- Heater with electronic regulator
- Limit outputs
- Insulation
- Flange seal included
Description
Additional information
| Brand |
|---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Related products
Buehler GAS 222.11 Sample gas probe
- Unheated
- Base unit with manual shut-off valve
- For in-situ and outlet filter
- With blowback connection
- The outlet filter can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases. Combined with inlet filter up to 10g/m³ and higher
- Including flange seal and screws
The probe has no innate ignition source and is therefore suitable for use in Ex areas.
Buehler GAS 222.20 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Heated probe with outlet filter and weather hood
- The outlet filter can easily be removed by turning the handle 90°
- The probe body and the area around the screw connection for the heated sample gas line are completely isolated
- Heater self-regulating to approx. 130 °C/ 266 °F (T3)/70 °C/158 °F (T4) with low temperature alarm
- For dust loads up to 2 g/m³
- This probe is suitable for use in explosive areas