- Auxiliary release on the front
- Escape release from the rear
- 2 illuminated pushbuttons
- With door monitoring contact
- Increased horizontal overtravel
- Plug connector
Euchner TP3-2131A024RC18C1993EXT2 TP proven plastic switch
SKU:
105546
Categories: Safety Switches, Safety switcheses and tools
Description
Additional information
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to [email protected] and specify the required positions and company details.
Specification
Approach direction
Horizontal and vertical
Can be adjusted in 90° steps
Increased overtravel for horizontal approach direction
Solenoid operating voltage
Switching element
Auxiliary releaseIs used for releasing the guard locking with the aid of a tool. To protect against tampering, the auxiliary release is sealed with sealing lacquer.
Escape releaseThis is used for manual release of guard locking from within the danger area without tools. With identification of On/Off position.
Electrical connection ratings
Other
Reliability values according to EN ISO 13849-1
In combination with Actuator BETAETIGER-P-GNTMechanical values and environment
In combination with Actuator BETAETIGER-P-GTMechanical values and environment
- AC/DC 24 V +10%, -15%
- Pushbutton white, illuminated
- Pushbutton blue, illuminated
TP3 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. |
2131 | Slow-action switching contact 2 NC + 1 NO + 1 NC (door monitoring contact) |
Housing material | Reinforced thermoplastic |
Weight | |
Net | 0,5 kg |
Ambient temperature | -20 ... 55 °C |
Degree of protection | IP54 |
Mechanical life | 1 x 106 |
Contact material | Silver alloy, gold flashed |
Switching principle | Slow-action switching contact |
Installation orientation | Any |
Number of door position positively driven contacts | 2 |
Number of guard lock monitoring positively driven contacts | 2 |
Number of guard lock monitoring NO contacts | 1 |
Connection | |
1 x | Built-in connector RC18 (18-pin) |
Approach speed | |
max. | 20 m/min |
Actuation frequency | 1200 1/h |
Guard locking principle | Closed-circuit current principle |
Locking force Fmax | 1300 N |
Locking force FZh | 1000 N |
Retention force | 10 N |
Extraction force | 20 N |
Actuating force | 10 N |
Thermal rated current Ith | 4 A |
Utilization category according to EN 60947-5-1 | |
AC-15 | 4A 50V |
DC-13 | 4A 24V |
Solenoid operating voltage | |
AC/DC | 24 V -15% ... +10% |
Short circuit protection according to IEC 60269-1 | |
(Fuse) | 4A gG |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 1,5 kV |
Switching voltage | |
Min. at 10mA | 12 V |
Switching current | |
Min. at 24V | 1 mA |
Power consumption | 8 W |
Solenoid duty cycle | 100 % |
Connection cross-section | 0,34 ... 1,5 mm? |
Additional feature | |
1 x push button | Blue (illuminated) |
White (illuminated) | |
C number | |
C1993 | Escape release long |
Monitoring of guard locking and the safety guard position | |
B10D | 3 x 106 |
Control of the guard locking | |
Category | Depending on external control of guard locking |
Performance Level | Depending on external control of guard locking |
PFHD | Depending on external control of guard locking |
Overtravel A B C D E | 7 mm |
Overtravel A B C D E | 2 mm |
Overtravel K L M N | 1,5 mm |